Auto Program
The TV will begin memorizing all of the available channels.
✎
nOTE
x
All available channels are automatically stored in
memory. It takes approximately 3 to 10 minutes to
memorize channels.
x
If you want to stop Auto Programming, press the
EnTERE button.
Other Features
¦
O
m → Channel
MEnU
Fine Tune
If the reception is clear, you do not have to fine tune the
channel, as this is done automatically during the search and
store operation. If the signal is weak or distorted, fine tune
the channel manually.
x
Select
Fine Tune in the Channel menu.
✎
Fine tuned channels that have been saved are marked
with an asterisk "*" on the right-hand side of the
channel number in the channel banner.
✎
To reset the fine-tuning, select
Color system (Auto / PAl-M / PAl-n /
nTsC)
Normally the TV can receive image and sound with good
quality in Auto mode. This mode detects the color signal
sources automatically. If the color implementation is
POWER
P
unsatisfactory, select any of PAL-M, PAL-N or NTSC.
¦
Changing the Preset Picture Mode
O
m → Picture → Mode → EnTERE
MEnU
Mode
t
Select your preferred picture type by
P.SIZE
pressing the P.MODE button.
Dynamic
: Suitable for a bright room.
■
standard
: Suitable for a normal
■
environment.
Movie
: Suitable for watching movies in
■
a dark room.
DUAL
Reset.
Picture Menu
S.MODE
P.MODE
MEDIA.P
Adjusting picture settings
¦
O
m → Picture → Backlight → EnTERE
MEnU
Backlight / Contrast / Brightness /
sharpness / Color / Tint (g/R)
Your television has several setting options for picture quality
control.
✎
nOTE
x
When you make changes to
Brightness, sharpness, Color or Tint (g/R) the
OSD will be adjusted accordingly.
x
In PC mode, you can only make changes to
Backlight, Contrast and Brightness.
x
Settings can be adjusted and stored for each
external device connected to the TV.
Changing the Picture Options
¦
Advanced settings
O
m → Picture → Advanced settings →
MEnU
EnTERE
(available in standard / Movie mode)
Compared to previous models, new Samsung TVs have
more precise pictures.
✎
In PC mode, you can only make changes to
and White Balance.
T V
Advanced Settings
Black Tone
Picture
Dynamic Contrast
Gamma
Color Space
Sound
White Balance
Flesh Tone
Channel
Edge Enhancement : On
Setup
Input
U Move E Enter R Return
Black Tone (Off / Dark / Darker / Darkest)
■
black level to adjust the screen depth.
Dynamic Contrast (Off / low / Medium / high)
■
Adjust the screen contrast.
: Adjust the primary color intensity.
gamma
■
Color space (Auto / native)
■
available to create the image.
Backlight, Contrast,
gamma
: Off
: Medium
:
0
: Native
:
:
0
: Select the
:
: Adjust the range of colors
13
English