Operation - Billy Goat FORCE F902H Manual Del Propietário

FORCE PUSH BLOWER Owner's Manual

OPERATION

BLOWING OPERATION
Your Billy Goat Force blower is equipped with an air director cone and
the patented Aim-N-Shoot
the air stream up or down as required to assist in moving debris. This
feature is extremely useful when debris has piled up to the point that it
cannot be blown any farther. The air stream can be directed upward to
blow the top of the debris pile over and allow the operator to continue
moving more debris farther.
ADJUSTING AIR DIRECTOR
To adjust air direction, squeeze the Aim-N-Shoot control lever. When
you want to blow debris at the same angle for an extended period,
choose a suitable position and use the finger controlled push button
lock to lock the cone in position. For operations that do not require the
use of the Aim-N-Shoot feature the manual adjustment knob (see Fig.
3) can be used to permanently lock the cone into position. NOTE: be
sure to release the knob when returning to using the Aim-N-Shoot.
DO NOT position director cone to where it will blow debris towards
people, vehicles or other objects in vicinity. Flying debris may
damage, harm, or cause injury to people or objects in air flow range.
FRONT DIVERTER POSITIONING (F9 and F13 models only)
The removable front diverter adapter can be slipped inside the
cone to direct the air stream forward. First turn off engine, and then
simply collapse the fold in the larger opening of the diverter and
slide inside the cone and allow it to expand. Then position to the
desired angle by rotating the diverter. This option is extremely
useful for cleaning out long cracks in pavement or for cleaning
under bushes, building overhangs or along curbs. (See Fig. 3 and
4)
WARNING: The unit will be more difficult to control due to the
air exiting the unit. Keep hands on the unit at all times when using
the front diverter. Please note that the Aim-N-Shoot feature will not
function when the front diverter is installed.
Part No 440313
control lever to allow the operator to direct
Manual
adjustment
knob
6
Fig. 3
Squeeze
and fold
here
Fig. 4
Form No F062917A
Front
diverter