Use; Control Panel - Falcon RMG4HD90SG Manual De Instrucciones

USE

A B C
Key Function
Upper panel closed: when pressed for about one sec-
A
ond it opens the upper panel. It switches the motor on
at the latest selected speed.
Upper panel open: when shortly pressed it switches
the motor on/off.
Decreases the suction speed.
B
Increases the suction speed.
C
Functioning only when the upper panel is open. This
D
speed has been timed at 10 minutes. After that time
the system activates automatically the latest selected
speed. The function is suitable for cooking conditions
when vapours and smells are of the utmost emission.
Functioning only when the upper panel is open. By
E
pressing this key it is possible to set up the motor to a
suction speed at 100 m
Functioning only when the motor is on. By pressing
F
this key it is possible to set the delayed shutdown of
the motor and the lighting to 30 minutes.
By pressing this key for about 2 seconds it is possible
G
to reset the filter saturation alarm.
By pressing this key the intensity of the lighting sys-
H
tem can be modified up to five levels.
Upper panel closed: when pressed for about 1 second
I
it opens the upper panel and sets the lights at the
maximum intensity.
Upper panel open: when shortly pressed it switches
the lights on/off.
Upper panel closed: when pressed for about one sec-
L
ond it opens the upper panel and switches the motor
on at the third speed and the lights at the maximum
intensity.
Upper panel open: when pressed for about 1 second it
switches off motor and lights resetting every activated
function, and closes the upper panel.
Keyboard lock: it is possible to jam the keyboard when, for example, cleaning the glass. The
motor and lights are switched off, and upper panel can be open or closed.
By pressing the F-key (Delay) for about 5 seconds the keyboard block can be activated or de-
activated. This function is confirmed by a Beep and by moving motor LEDS on display.
EN

Control panel

E
D
3
/h .
F
G
H
Display
Indicates the selected speed.
Number of lit LEDS decreases.
Number of lit LEDS increases.
I flashes and all the LEDS on the display
are lit.
By pressing the key the function is deacti-
vated.
24–symbol appears and the LEDS on the
display go off cyclically, one by one.
By pressing the key the function is deacti-
vated.
A flashing clock symbol appears.
By pressing the key the function is deacti-
vated.
A drop symbol indicates that the metal
grease filters saturation alarm has been
activated, and the filters need to be
washed. The alarm is triggered after 100
working hours.
C indicates that the charcoal filter satura-
tion alarm has been activated, and the filter
has to be replaced. The alarm s triggered
after 200 working hours.
L
I
2
26
6