Descargar Imprimir esta página

Technical Data; Scope Of Delivery; Installation - T.I.P. Clean Jet 1000 Plus+ Kit Instrucciones Para El Manejo

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 32
The pump is not suited to discharge saltwater, faeces, inflammable, etching, explosive or
other hazardous liquids. Please observe the max. and min. temperatures of the liquids to be
discharged stated in the technical data.
3.

Technical Data

Model
Mains voltage / frequency
Nominal performance
Protection type
Suction port
Pressure port
1)
Max. flow rate (Q
)
max
Max. pressure
1)
Max. delivery height (H
)
max
Max. suction height
Max. size of the solids being pumped
Max. permissible operating pressure
Min. ambient temperature
Max. ambient temperature
Min. fluid temperature
Max. fluid temperature (T
)
max
Max. cut-in frequency in one hour
Length of connection cable
Cable type
Weight (net)
Guaranteed sound power level (L
Measured sound power level (L
2)
Sound pressure level (L
)
pA
Dimensions (L x D x H)
Item no.
1)
The values were determined with free, unreduced in- an outlet.
2)
Noise emission values obtained according to the EN 12639 regulation. Measurement method according to
EN ISO 3744.
4.

Scope of delivery

The scope of the delivery of this product includes:
One pump with connection cable, one suction line, one check valve (or non-return valve), one intake filter, one
operating manual. Please verify that the scope of delivery is complete. Depending on the purpose of the
application, additional accessories may be necessary (please refer to the chapters titled "Installation",
"Automation with special accessories" and "How to order spare parts").
If possible, keep the packing until the warranty period has expired. Please dispose of the packing materials in an
environmental-friendly manner.
5.

Installation

5.1.
General installation information
During the entire process of installation, the device must not be connected to the electrical
mains.
The pump should be installed in a dry place with an ambient temperature not to exceed 40 °C
and not to fall below 5 °C. The pump and the entire connection system have to be protected
from frost and other climatic influences.
9
Clean Jet 1000 Plus + Kit
230 V ~ 50 Hz
800 Watt
IP 44
30.93 mm
30.93 mm
3,300 l/h
4.6 bar
46 m
9 m
3 mm
6 bar
5 °C
40 °C
2 °C
35 °C
40, evenly distributed
1.5 m
H07RN-F
8.1 kg
2)
81 dB
)
WA
2)
78.7 dB
)
WA
70.7 dB
35 x 18 x 26 cm
30094
Clean Jet 1300 Plus + Kit
230 V ~ 50 Hz
1,200 Watt
IP 44
, female
30.93 mm
(1 ")
, female
30.93 mm
(1 ")
4,350 l/h
5.0 bar
50 m
9 m
3 mm
6 bar
5 °C
40 °C
2 °C
35 °C
40, evenly distributed
1.5 m
H07RN-F
10.7 kg
84.5 dB
83 dB
77 dB
38 x 22 x 29 cm
30087
2
, female
(1 ")
, female
(1 ")

Publicidad

loading