Preparation Before Use - ZIGBEE E1 Manual De Instrucciones

7.Do not allow children to play with fixed controls.
8.Frequently examine the installation for imbalance and signs
of wear or damage to cables springs and fixings. Do not use if
repair or adjustment is necessary.
9.Do not operate when maintenance, such as window cleaning,
is being carried out in the vicinity.
10.WARNING: Important safety instructions. Follow all
instructions since incorrect installation can lead to severe injury.
11.Before installing the drive, remove any unnecessary cords or
components and disable any equipment not needed for
powered operation.
12.That the characteristics of the driven part must be
compatible with the rated load and rated operating time.
13.This appliance contains batteries that are non-replaceable.
14.Fixed controls have to be clearly visible a er installation.

Preparation before Use

1. A smartphone or tablet that supports Wi-Fi or a cellular
network (with iOS or Android system) is required.
2. An Aqara Zigbee 3.0 hub is required (The distance between
this product and your hub should be within 30 m).
3. Download and install the Aqara Home app.
4. A drilling machine is required (must be equipped with a φ5
drill bit).
5. Please make sure that there is a Wi-Fi connection and your
internet connection is stable.
6. Please charge the Roller Shade Driver E1 for about 2 hours
and 30 minutes.
7. The mass and the dimension of the shade to be driven shall
be compatible with the rated torque and rated operating time.
8. Note: The accessories are only compatible with bead chains
that meet the following standards:
Plastic/metal beads with a thickness of 3-6 mm
2