Publicidad
Enlaces rápidos
Power Windows | Leve-glace Electrique | Elektrische Fensterheber | Elevalunas Electricos
Máquina De Vidro Elétrico | Elektrische Raamheffers | Alzacristalli Elettrici
rear doors (4d), portes arriere (4p), hintere türen (4t), puertas posteriores (4p), portas traseiras (4p), achterportieren
(4p), porte posteriori (4p)
Pour / For
Volkswagen
Volkswagen Polo (7/2009>)
Solo meccanismo per motori originali con
elettronica / Mechanical part only. Replaces
window regulator already provided with original
motor with electronic box / Solo mecanismo
para motor original con sistema confort
LH 6R4839461C
RH 6R4839462C
LH 6R4839461E
RH 6R4839462E
14 w01
left door - portière gauche - linke tür - puerta lado izquierdo - porta esquerda - linkerportier - porta lato sinistro
THIS INSTALLATION INSTRUCTION IS FOR BOTH LEFT AND RIGHT SIDE.
CETTE INSTRUCTION DE MONTAGE EST POUR LES DEUX COTES DROIT ET GAUCHE.
DIESE MONTAGE-ANLEITUNG IST FÜR DIE BEIDE LINKE UND RECHTE SEITE.
ESTA INSTRUCCION DE MONTAJE ES PARA LOS DOS LADOS IZQUIERDO Y DERECHO.
ESTAS INSTRUÇÕES VALEM TANTO PARA O LADO ESQUERDO QUANTO PARA O DIREITO.
LA PRESENTE ISTRUZIONE VALE SIA PER IL LATO SINISTRO CHE PER IL LATO DESTRO.
VK718
Publicidad
Manuales relacionados para Lift Tek VK718
Resumen de contenidos para Lift Tek VK718
- Página 1 Power Windows | Leve-glace Electrique | Elektrische Fensterheber | Elevalunas Electricos Máquina De Vidro Elétrico | Elektrische Raamheffers | Alzacristalli Elettrici rear doors (4d), portes arriere (4p), hintere türen (4t), puertas posteriores (4p), portas traseiras (4p), achterportieren VK718 (4p), porte posteriori (4p) Pour / For left door - portière gauche - linke tür - puerta lado izquierdo - porta esquerda - linkerportier - porta lato sinistro...
- Página 2 VK718 08/02/2019 ENGLISH ENGLISH THIS INSTALLATION INSTRUCTION IS FOR BOTH LEFT AND RIGHT SIDE. A) WARNING: DO NOT OPERATE THE WINDOW REGULATOR BEFORE IT IS COMPLETELY ASSEMBLY ON VEHICLE. Remove door trim and window regulator. B) Position the electric window regulator on the panel and fix it with the appropriate screws in the points n ° 1 and 2. Fix the glass in the glass plate (point 6) recovering the pin and the appropriate clip from the original piece C) Remove the pvc gear clamp and the three screws from the motor plate (photo A).