Comelit IP 100 Serie Guida Rapida página 26

Channel parameters modification
Double-click the channel parameters which needed to modify on the left "Channel
menu", then input relevant parameters, click"Save", as shown in the below picture:
3) Enable: Select the relevant channel, check "Enable"
4) Protocol: ONVIF Standard protocol/ I8 Private protocol/ I9 Private protocol/ RTSP
Standard protocol for selection
3）IP Add：Edit and modify the IP address manually
4）Port：Edit and set the relevant port number
5）Stream Type: Select "Main Stream" or "Sub Stream"
6）Network type：Select"TCP"or"UDP"
7）User ：Input the user name
8）Password：Fill the password in the password field
Modify IPC Parameters
Double-click the channel parameters which needed to modify on the " Channel menu",
then fill in the relevant parameters, click "Modify", as shown in the below picture:
26