Step 3:
Next, IP addresses are setup on the OOB (Out-Of-Band)
Interface and/or the VLAN 1 routing interface.
You can use these IP addresses to access the CLI, Web
interface, or SNMP interface of the switch.
To access the switch through any Management Interface
you can
.
Setup the IP address for the Management Interface.
.
Setup the default gateway if IP address is manually
configured on both routing and OOB interface.
Would you like to setup the Out-Of-Band interface now?
[Y/N] y
Please enter the IP address of the device (A.B.C.D) or
enter "DHCP" (without the quotes) to automatically
request an IP address from the network DHCP server.
[192.168.2.1]: dhcp
(
3
OOB
IP
.
.
IP
DHCP
IP
OOB
[Y/N] y
(A.B.C.D)
IP
[192.168.2.1]: dhcp)
/
VLAN 1
CLI Web
IP
DHCP
IP
SNMP
89