Publicidad
M.2 SSD (Type 2280): How to Install the M.2 SSD
B
如何安裝 M.2 / SSD So installieren Sie die M.2-SSD / Comment installer le SSD M.2 / Come installare l'unità SSD M.2 / Cómo instalar el disco de estado sólido M.2/
M.2 / Como Instalar o SSD M.2 / M.2 SSD를 설치하는 방법 / M.2 SSD の取り付け方法
1. Remove the stando screw.
2. Tighten the screw to secure the
extended bracket to the
motherboard.
2.5-inch Hard Drive: How to Install the Hard Drive
C
如何安裝硬碟/ So installieren Sie die Festplatte / Comment installer le disque dur / Come installare l'unità HDD / Cómo instalar la unidad de disco duro /
Como Instalar o Disco Rígido / 하드 드라이브를 설치하는 방법 / ハードドライブの取り付け方法
1. Remove the four screws on the bottom case.
2. Unscrew the four screws that hold the HDD
en li up and remove the bottom panel.
cage in place.
4. Attach the HDD cage to the bottom
5. Connect the SATA Data and Power
panel and secure it using the four screws.
Cable to the motherboard.
SO-DIMM Slots: How to Install the Memory Modules
D
如何安裝記憶體模組 / So installieren Sie die Speichermodule / Comment installer les modules de mémoire / Come installare i moduli di memoria / Cómo instalar los módulos de memoria /
/ Como Instalar os Módulos de Memória / 메모리 모듈/ メモリモジュール
1. Carefully insert the SO-DIMM memory modules
into the slot at a 30-degree angle.
Extended Bracket.
3. Carefully insert the M.2 SSD into
4. Tighten the screw to secure the
the slot.
M.2 SSD to the motherboard.
3. Install the HDD in the cage using the four
screws.
en connect the SATA cable to the
HDD.
6. Align the three latches on the bottom panel with the three latch
holes on the chassis.
en reinstall the bottom panel until it
clicks into place.
Note:
-
e Beebox series requires DDR4 SO-DIMM.
- For dual channel con guration, you always need to
install identical (the same brand, speed, size and chip-type)
DDR4 SO-DIMM pairs.
2. Push down until the modules snap into place.
How to Install the VESA Bracket
如何安裝 VESA 支架/ So installieren Sie die VESA-Halterung / Comment installer le support VESA / Come installare il supporto VESA / Cómo instalar el soporte VESA /
VESA / Como Instalar a Braçadeira VESA / VESA 브래킷을 설치하는 방법 / VESA ブラケットの取り付け方法
1. Attach the two screws to the base of the
Beebox series.
/
Positions of the Beebox series
Beebox 系列擺放/ Positionen der Beebox-Serie / Positions de la série Beebox / Posizioni della
serie Beebox / Posiciones de la serie Beebox /
Posições de série Beebox / Beebox 시리즈의 위치 / Beebox シリーズの位置
e Beebox series can be placed in vertical or horizontal position.
Horizontal Position
Vertical Position
*Please note that keeping the Beebox series in a vertical position
will ensure better cooling performance.
Support
支援 / Support / Assistance / Supporto / Soporte técnico /
Please visit our web site at http:/www.asrock.com for:
A list of tested memory, M.2, 2.5" SATA HDD, wireless interface cards and operating systems that
are supported; for information about downloading the latest driver and BIOS updates; as well
as the latest product support information.
- 如需參考已測試過 記憶體、M.2、2.5" SATA HDD、無線介面卡和支援的作業系統清單
- 若要下載最新驅動程式和BIOS更新
- 如需產品支援資訊請前往 http:/www.asrock.com
Folgendes nden Sie auf unserer Webseite unter http:/www.asrock.com:
- Eine Liste unterstützter getesteter Speichermodule, M.2-, 2,5-Zoll SATA-Festplatten,
WLAN-Schnittstellenkarten und Betriebssysteme;
- Informationen zum Herunterladen aktuellster Treiber- und BIOS-Versionen;
- sowie aktuellste Informationen über unterstützte Produkte.
Veuillez visiter notre site Web à l'adresse http:/www.asrock.com pour :
- Une liste de mémoires, disques M.2, disques durs SATA 2,5", cartes d'interface sans l et
systèmes d'exploitation testés et pris en charge ;
- Des informations sur le téléchargement des dernières mises à jour du pilote et du BIOS ;
- Les dernières informations d'assistance produit.
Visitare il nostro sito all'indirizzo http:/www.asrock.com per:
- L'elenco di memorie, M.2, HDD SATA 2.5", schede d'interfaccia wireless e sistemi operativi che
sono stati testati e sono supportati;
- Informazioni sul download dei driver più recenti e degli aggiornamenti BIOS;
- Informazioni aggiornate sul supporto dei prodotti.
Visite nuestro sitio Web en http:/www.asrock.com para:
- Obtener una lista de memorias, M.2, HDD SATA de 2,5", tarjetas de interfaz inalámbricas y
sistemas operativos admitidos probados;
- Obtener información acerca de la descarga del controlador y de las actualiz aciones del BIOS
más recientes;
- Obtener la información más reciente sobre el soporte técnico del producto.
2. Attach the VESA Bracket to the rear of
3. Mount the Beebox series by sliding it into place.
a compatible display using the four screws.
*Choose mounting holes depending on the
mounting hole pattern of your LCD screen
(75 mm × 75 mm or 100 mm × 100 mm).
USB Power On Function:
USB 電源開啟功能/ USB-Einschaltfunktion / Fonction d'alimentation USB / Funzione di
accensione USB / Función de alimentación USB /
Beebox /
Função de Ligamento USB / USB 전원 켜기 기능/ USB 電源オン機能
To enable USB Power On Function:
Wall-mounted
1. Enter BIOS by pressing <F2> or <Del> during device startup.
2. Select "Advanced > ACPI Con guration" from the menu.
3. Set "USB Keyboard/ Remote Power On" and " USB Mouse Power On"
settings to "Enabled".
4. Press F10 to Save and Exit.
/ Suporte / 지원 / サポート
-
: http:/www.asrock.com
-
, M.2,
-
-
Por favor, visite nosso Website em http: /www.asrock.com para:
- Uma lista de memórias testadas, M.2, HDD 2.5" SATA, placas de interface sem o e
sistemas operacionais que são suportados;
- para informações sobre como baixar as últimas atualizações de drivers e BIOS;
- bem como as mais recentes informações de suporte do produto.
다음 항목은 당사 웹사이트 http:/www.asrock.com을 참조하십시오.
-테스트한 메모리, M.2, 2.5" SATA HDD, 무선 인터페이스 카드 및 지원되는 운영
체제의 목록
-최신 드라이버 및 BIOS 업데이트 다운로드에 관한 정보
-최신 제품 지원 정보
次については弊社ウェブサイト（http:/www.asrock.com）をご覧ください:
- テスト済みメモリ、M.2、2.5" SATA HDD、ワイヤレスインターフェースカード、
対応するオペレーティングシステム
- 最新のドライバと BIOS アップデートのダウンロードに関する情報
-最新製品サポート情報
e terms HDMI™ and HDMI High-De nition Multimedia Interface,
and the HDMI logo are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.
USB /
USB Power On Function allows
system power on via USB
keyboard/mouse.
is function is useful when the
Beebox series is mounted behind
your display/TV.
*You can also easily power on/o
the Beebox series by using the
remote controller.
:
SATA 2,5
,
;
BIOS
.
Publicidad
