Dorel Juvenile Group Accu-Touch 49424 Manual Del Usuario página 11

Troubleshooting and Displays
The thermometer has been designed to display feedback and warnings to
ensure proper usage and accurate temperature measurement. When an
error indication appears, you will hear two beeps 5 seconds apart and
then the thermometer will turn off automatically. In the event of a
malfunction or incorrect temperature measurement, the following
warnings will be displayed:
Display Meaning
The measured
temperature is below
95°F (35°C).
The measured temperature
is above 107.6°F (42°C),
or thermometer was
placed in body position
before two beeps were
heard.
The thermometer is too
cold or too hot to
operate.
Temperature did not
register because of poor
contact, patient movement,
or poor placement.
Unit malfunctioned.
Battery icon is on
continuously.
Only battery icon is on
and the device
automatically turns
itself off.
Action
Turn the unit off and then on again.
Retake temperature as described in
"Using Your Thermometer" section.
Turn the unit off and then on again.
To verify the reading, retake
temperature as described in "Using
Your Thermometer" section.
Verify room temperature is within
50°F to 104°F (16°C to 40°C).
Retake temperature as described in
"Using Your Thermometer" section.
Turn the unit off, wait two minutes,
turn it on again and retake
temperature as described in "Using
Your Thermometer" section.
Do not use the thermometer–call
Consumer Relations at (800) 544-1108
for instructions.
The batteries have enough
remaining life for a few more
measurements. Replace batteries.
The batteries are drained (see
"Replacing Batteries" section).
9