Configuration - Lenco DIR-150 Manual Del Usuario

Financial Info
View the stock index
System Information
View details of units and of connect network. The information includes MAC address which you are
required to fill in when registration of "my mediaU" membership.
9.

CONFIGURATION

Time Display Analog/digital
My MediaU When it is enabled, My mediaU will exist on the main menu. If various mediaU
accounts exist in the Radio, Select the default login account in here.
Network Wireless Network Configuration: Enable/disable WiFi network. When you
enable the WiFi network, the system will automatically select the required AP.
Enter WEP or WPA code to connect the WiFi.
Wireless Network (WPS PBC): If you are using a router with WPS/QSS button,
you may set up the network connection simple via WPS function. Enter it and
go to press the WPS/QSS button on your router within 120 seconds. The
connection between the router and Music Link will then be configured
automatically.
Manual Configuration: You can choose DHPC (which IP assigned automatically)
or manually input IP address for wireless network connection. When you select
manual setting for wired connection, the following have to be entered: SSID
(name of access point), IP Address, subnet mask, default gateway, preferred
DNS server, and alternate DNS server.
Check Network When Power On: Enable/disable WiFi network. When you
enable the WiFi network, the system will automatically search the available
AP. Select required AP.
Date & Time Setup the date and time
Set time format display as 12 Hour or 24 Hour
Set date format(YYYY/MM/DD-DD/MM/YYYY-MM/DD/YYYY)
Daylight SavingTime(DST)
o
Tips: On the model of "ON", the time will be one hour More than the actual
time.
o
Tips: On the model of "OFF", the time will be same as the actual time. If it was
on the model of the "Daylight Saving Time(DST) and you choose "OFF", the
time will be deducted one hour, that's to say, the time will be same as the
actual time.
Alarm There are three independent alarms-2 alarms of absolute time setting (Alarm 1
and Alarm 2) and 1 alarm for relative time setting (Alarm NAP). Press Alarm on
the remote control to enter this menu directly.
ON
OFF
12