Platform; Compatibility; Assembling The Platform; Putting The Rings On The Chassis - JANE GO UP Manual De Instrucciones

B. PLATFORM
The Universal Go Up platform is the best way of making it possible for
your pushchair to carry a second child.
The platform is designed for children from 2 years old and weighing
up to 20 kg.
C. COMPATIBILITY
This platform is designed to be fitted easily onto different types of
pushchairs.
For the Jané, Concord or be cool pushchair please see the compa-
tibility table.
D. ASSEMBLING THE PLATFORM
Insert the metal wheel shaft (2) into the holes in the platform (1) until
you hear them click into place.
Fit the extension arms (3) onto the platform while pressing the ad-
justment button (4). The arms must NOT be outside the limit marked
"max." 1b
30
EN
IM01979 Plataforma Go Up.indd 30
1a
E. PUTTING THE RINGS ON THE CHASSIS
They should be fitted as low as possible on the pushchair.
Place the toothed strap (5) around the tube of the chassis.
Fir the connector ring (7) by inserting the toothed strap through the slot
of the ring, aligning the threads on both.
2c
and turn the ring clockwise to fasten it securely to the tube.
NOTE: To fasten the ring securely to a chassis with a slim tube, remove
the non-slip rubber from the toothed strap.
WARNING: The connectors should not interfere with the folding
!
of the pushchair or the braking system. If they do, you need to
reposition the rings.
F. FITTING THE PLATFORM
Position the platform in front of the rear wheels of the
pushchair and press the adjustment button to approximately
adjust the width of the arms.
3a
Release the cams (9) on both arms.
button (10) found just below the hook (8) in order to open it.
Fit the hooks through the rings (7) and click them fastened into
place.
3d
Find the perfect position so the platform is level (parallel to
the ground) and as close as possible to the pushchair. Adjust
2a
Pull the toothed strap firmly
2b
2d
3b
Press the hook release
3c
28/6/17 10:59