Outdoor Use; Before Use; During Use - MaxPro MPBMS210 Manual Del Usuario

equipment may be affected (if the system impedance of the power supply is lower than 0,295 + j0,184
Ohm, disturbances are unlikely to occur); if you need further clarification, you may contact your local
power supply authority

OUTDOOR USE

30 mA maximum, and only use an extension cord which is intended for outdoor use and equipped with a
splashproof coupling-socket

BEFORE USE

mount the tool on a flat and stable working surface (e.g. workbench)
harmful (contact with or inhalation of the dust may cause allergic reactions and/or respiratory diseases to
the operator or bystanders); wear a dust mask and work with a dust extraction device when connectable
with additives for wood conditioning; wear a dust mask and work with a dust extraction device
when connectable
-related national requirements for the materials you want to work with
Do not work materials containing asbestos (asbestos is considered carcinogenic)
another person to hold or support the work piece while working; use the saw table
extension
before you start working
ACCESSORIES
Maxpro can assure flawless functioning of the tool only when the correct accessories are used which can
be obtained from your
For mounting/using
adaptors to fit large-hole saw blades

DURING USE

-lock button only when tool is at a standstill
5
M M itre Saw MPBMS210 User Manual
-time voltage drops; under unfavourable power supply conditions, other
piece (do not work with pieces that are too small to clamp)
Maxpro dealer
non-Maxpro accessories observe the instructions of the manufacturer concerned
making any adjustment or changing any accessory
16 years
(FI) circuit breaker with a triggering current of
voltage indicated on the nameplate of the tool
protective gloves
wood species, minerals and metal may be
(such as oak and beech dust) especially in conjunction
guard system
each use
move freely and close instantly
open position
piece
defective or worn table insert
cutting path before you start cutting
other elements in your work piece; remove them
at least the highest no-load speed of the tool
or dull
tool spindle without play; never use reducors or
rotating saw blade