English; Safety Precautions - Lenco DIR-100 Manual Del Usuario

English

1. Safety Precautions


Do not use this device near water.

Clean only with a slightly damp cloth.

Do not cover or block any ventilation openings. When placing the device on a shelf, leave
5 cm (2") free space around the whole device.

Install in accordance with the supplied user manual.

Don't step on or pinch the power adaptor. Be very careful, particularly near the plugs and the
cable's exit point. Do not place heavy items on the power adaptor, which may damage it. Keep
the entire device out of children's reach! When playing with the power cable, they can seriously
injure themselves.

Unplug this device during lightning storms or when unused for a long period.

Keep the device away from heat sources such as radiators, heaters, stoves, candles and other
heat-generating products.

Avoid using the device near strong magnetic fields.

Electrostatic discharge can disturb normal usage of this device. If so, simply reset and restart
the device following the instruction manual. During file transmission, please handle with care
and operate in a static-free environment.

Warning! Never insert an object into the product through the vents or openings. High voltage
flows through the product and inserting an object can cause electric shock and/or short circuit
internal parts. For the same reason, do not spill water or liquid on the product.

Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming pools.

Do not use this device when condensation may occur.

Although this device is manufactured with the utmost care and checked several times before
leaving the factory, it is still possible that problems may occur, as with all electrical appliances.
If you notice smoke, an excessive build-up of heat or any other unexpected phenomena, you
should disconnect the plug from the main power socket immediately.

This device must be well ventilated at all time!

This device must operate on a power source as specified on the specification label. If you are
not sure of the type of power supply used in your home, consult your dealer or local power
company.

The socket outlet must be installed near the equipment and must be easily accessible.

Do not overload ac outlets or extension cords. Overloading can cause fire or electric shock.

Keep away from rodents. Rodents enjoy biting on power cords.

Always hold the plug when pulling it out of the main supply socket. Do not pull the power cord.
This can cause a short circuit.

Avoid placing the device on any surfaces that may be subject to vibrations or shocks.

To protect the device during a thunderstorm, unplug the ac power adaptor.

When the device is not in use for long periods, unplug the ac power adaptor for safety reasons.

To clean the device, use a soft dry cloth. Do not use solvents or petrol based fluids. To remove
severe stains, you may use a damp cloth with dilute detergent.

The supplier is not responsible for damage or lost data caused by malfunction, misuse,
modification of the device or battery replacement.

The apparatus shall not be exposed to dripping or splashing and make sure that no objects
filled with liquids, such as vases, are placed on or near the apparatus.

To completely disconnect the power input, the mains plug of the apparatus shall be
disconnected from the mains, as the disconnect device is the mains plug of apparatus.

The mains plug of the apparatus should not be obstructed or should be easily accessed during
intended use.

Battery shall not be exposed to excessive heat such as sunshine, fire or the like.

The ventilation should not be impeded by covering the ventilation openings with items such as
newspapers, table-cloths, curtains etc.

No naked flame sources such as lighted candles should be placed on the apparatus.

Attention should be drawn to the environmental aspects of battery disposal.
DIR-100
3