Danze Ziga Zaga DF032130 Instrucciones De Montaje página 5

10. Install the wall anchor hardware with a Phillips
screwdriver in the following order: flat washer
(S), plastic washer (D), spring washer (E), wood
screw (F), and metal cap (G).
11. Install the Ziga Zaga™ vessel lavatory ac-
cording to the installation instructions provided
with the vessel lavatory.
12. Install the 5 7/8" pulls (H1) on the side door
panels and 11 7/8" pull (H2) on the middle door
panel with 1" bolts (I) using a Phillips screw-
driver.
13. If needed, door hinges can be adjusted for
height and depth by loosening the hinge screws
on the inside and positioning them to the ap-
propriate location.

, wood wood
Please refer to Homeowner Care Manual for troubleshooting, care and mainte-
nance information.
14. If needed, drawer glides can be adjusted for
height.
15. Install metal shelf holders (R) into the holes
for the shelves; four holders (R) are required for
each shelf. Install the inner shelf (N2) onto the
holders (R) behind the middle door panel and
the inner shelf (N1) onto the holders (R) behind
the right door panel.
8