Creative WP-450 Manual De Instrucciones página 6

Light
Indicator
5.
Green and blinks slowly: automatically
Right
searching and attempts to connect to the
earcup light
last paired device.
indicator
Blue and blinks slowly: connected to a
paired device.
Blue and blinks rapidly: in pairing mode
and is ready to pair with a new device.
Blue and flashes twice: muting microphone
during a call.
Red and blinks twice: powering off the
headset.
Red and blinks slowly: low battery level,
charge the headset soonest. This is
accompanied by a beep tone every 2
minutes.
6.
Red: charging headset.
Left
Green: headset fully charged.
earcup light
indicator
Connector /
Port
7.
Micro-USB
Use the supplied USB cable for charging
charging
the headset via a laptop or computer.
connector
8.
Invisible
Noise suppression microphone for crystal
Microphone
clear communications
Function
Function
Technical Specifications:
•
Driver: 34mm Neodymium magnet
•
Frequency Response: 18Hz ~ 22kHz
•
Impedance: 32ohms
•
Wireless Technology: Bluetooth 2.1 + EDR
(Enhanced Data Rate)
•
Bluetooth Profiles: A2DP (Wireless stereo Bluetooth ),
AVRCP ( Bluetooth remote control), HFP (Hands-free
profile), HSP (Headset profile)
•
Audio Codec: apt-X, SBC, FastStream
•
Operating Frequency: 2402 ~ 2480MHz
•
Operating Range: Up to 10m / 33ft
•
Power Supply: Rechargeable Lithium Ion battery, 3.7V,
240mAh
•
Charge via USB: 5VDC, 500mA
•
Charge / Playback / Talk time: 1 hour / 8 hours / 9 hours
•
Net Weight: 114g / 4oz