Safety Information - IK Multimedia iLoud Guia De Inicio Rapido

Safety Information

• To reduce risk of internal damage or electric shock, never
expose the unit to rain, moisture or excessive humidity.
Never let liquid get into the unit, especially on the front
(speaker) side or the rear bass-reflex port.
• The power supply unit included in the box is designed for
indoor use only.
• Never let any object enter into the rear bass-reflex port.
• Never expose the unit to a temperature higher than 60°C
(140°F), and never recharge the battery if the environmental
temperature is higher than 38°C (100°F) or lower than 0°C.
This might stress the internal battery up to the point where
it could be permanently damaged.
• For optimal battery performance and life, always use the
unit at temperatures between 18°C (65°F) and 25°C (77°F).
• Never attempt to connect iLoud to a power supply different
than the one included in the box. Doing so might damage
the internal battery and make it overheat, causing potential
danger.
• Never step on, crush, or attempt to modify the power cords
connected to the power supply unit.
• Disconnect the unit from the main power supply line when it
won't be used for long time.
• Disconnect the unit from the main power supply line during
a lightning storm.
• There are no user-serviceable parts inside iLoud, never
open the unit.
• All servicing should be referred to qualified personnel only.
• The speakers contained in iLoud have magnets, which
could be dangerous if you have a pacemaker.
iLoud
Thank you for purchasing iLoud, the first studio-quality
portable speaker designed for musicians.
Your package contains:
• iLoud
• iLoud Charger
• 1/8" TRRS audio cable, 1m (3.33')
• Quick Start Guide
• Registration Card
While there are hundreds of portable speakers on the
market, none of them were developed with musicians in
mind — until now. Meet iLoud — the first portable speaker
for musicians. We've created a portable speaker that
combines superior power with spectacular audio resolution
and amazing low end. For the first time, musicians can
have a portable speaker that sounds like a studio monitor,
and allows them to create high-quality compositions and
accurate mixes on the go.
Features
iLoud is designed to provide hi-fi, studio-monitor-quality
sound, in a surprisingly small package that can easily fit in
a bag.
Its full 40W of power will provide enough volume to make
iLoud seem like a speaker that's three times bigger than it is!
With iLoud you can monitor your music creations made on
the go with your iPhone, iPad or any other mobile device,
like a laptop computer, with the confidence that you can trust
what you're hearing to be sonically accurate.
The incredibly pristine and transparent sound reproduction of
iLoud is a result of its two-way bi-amped speaker system, with
an active digital crossover and time alignment. The onboard
DSP provides full control of the system under all conditions,
making sure iLoud will sound its best at any volume level.
iLoud's high-performance Li-Ion rechargeable battery allows
for hours of continuous playback before you need to recharge,
and the built-in auto-standby function saves battery charge
when no audio has been fed to iLoud for several minutes.
iLoud provides an analog 1/8" stereo line input that lets you
connect a stereo line-level sound source from devices such
as smart phones, tablets, MP3 players, laptop computers,
receivers and so on.
You can also stream high-quality music to iLoud via
Bluetooth. iLoud will accept up to two paired devices at the
same time, allowing audio streaming from one or the other
without having to "pair" every time you switch devices.
The built-in "iRig" circuit allows you to connect iLoud to an
iPhone, iPod touch or iPad using the included 1/8" TRRS
cable, and play guitar or sing into a dynamic microphone
while using the AmpliTube or VocaLive industry-standard
audio FX apps.
Register Your iLoud
By registering, you can access technical support, activate
your warranty, and receive free JamPoints™, which will
be added to your account. JamPoints allow you to obtain
discounts on future IK purchases! Registering also keeps
you up-to-date with product news and update information.
Register at: www.ikmultimedia.com/registration
Setup
We recommend fully charging your iLoud the first time you
use it. To do so, connect the included Charger to a mains
socket and then to iLoud (11). The fastest way to charge is
to leave iLoud OFF while charging. You can listen to iLoud
while charging — just turn it ON — but the charging process
will take longer. A full charge (with iLoud off) takes about
two hours, but because iLoud is delivered partially charged,
your first charge will take less than that.
During the charging phase, the LED (9) on the back of iLoud
will be ORANGE. Once the charge has completed it will turn
GREEN.
Once charged, using iLoud connected to the Charger will
not drain the battery. Whenever it's convenient, use iLoud
with the charger connected.
When the iLoud battery is getting low, the LED (9) on the
back panel will turn RED. The RED light on the front panel