3. TRANSMITTER RW16M
The RW16M hand-held radio microphone features the following controls:
1.
on/off LED
2.
on/off button
3.
openable battery cover for accessing the battery compartment
4.
IR infrared port
RW16M sync procedure:
•
connect the receiver's power supply cable to a power outlet. Press the on/off button for about 1"
to turn it on.
I
•
unscrew the Battery Cover and insert the supplied batteries into the transmitter, respecting the
indicated polarity. Press the on/off button for about 3" to turn it on.
•
align the IR ports as shown in the figure
•
press the ASC sync button on the receiver. The display starts flashing and stops once the operation
has been completed.
RW16 MS/BS
18
4
English
1
2
3
4
Cod. 420120321 REV. 1.0