User Manual
EN
FireWare Hybrid
Observers without protective clothing should keep a distance of at least 5 metres.
In the event service or repair is required this product can ONLY be opened by a FireWare
technician.
Place the appliance stabile on a flat surface and make sure the appliance cannot fall over.
DO NOT touch the appliance during and after use. It may become HOT.
Make sure all people are located on the same side of the equipment as the wind is blowing
from.
Never let the fire extinguishing trainer continue burning for longer than 3 minutes. Then
allow the device to first cool down for some time before you ignite it again.
Always allow the fire extinguishing trainer to cool down for at least 20 minutes before you
relocate it.
It is not intended for the heating of areas.
Always allow the device to cool down sufficiently before you clean it or store it.
NEVER use extra fuels, such as oil of grease.
Keep flammable materials or surfaces at a minimum distance of 5 meters.
Always keep an extra fire extinguisher at hand.
Remove paper, leaves and dead grass etc. before use.
NEVER place objects (cloth, etc) over the unit when it is in use as the unit is hot and can
cause burns and fire.
This appliance is intended for utilization OUTDOOR.
Never burn spray cans etc. in the fire.
www.FireWare.nl
FireWare Hybrid
13