Ec Declaration Of Conformity - Milwaukee M18 FPFT Manual Original

Once yellow paint is visible, stop extending. Further extension
could damage or break the sh tape.
Before pulling wire through, be mindful of your surroundings and
potential nearby hazards to yourself and others in the event the
tape breaks free during pulling.
NOTE: If the tool binds, release pressure from the trigger
immediately. Do not force a pull that has snagged or encounterd
a point of resistance. Instead, remove the wire and clear the
obstruction.
To retract the sh tape, move the control switch to the retract
position and pull the trigger. Stop retracting once the sh tape
has returned to the starting position. Continuing to retract further
could damage or break the drum.
MAINTENANCE
Remove the battery pack before starting any work on the
appliance.
Wash and wipe the exposed cable with a rag. Push the exposed
cable back into the drum.
Before storing the drain cleaner, remove the full length of the
cable. Coil it loosely and clean.
GB
Use only Milwaukee accessories and Milwaukee spare parts. Should
components need to be replaced which have not been described,
please contact one of our Milwaukee service agents (see our list of
guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please
state the Article No. as well as the machine type printed on
the label and order the drawing at your local service agents or
directly at: Techtronic Industries GmbH, Max-Eyth-Straße 10,
71364 Winnenden, Germany.

EC DECLARATION OF CONFORMITY

We declare under our sole responsibility that the product described
under "Technical Data" ful lls all the relevant provisions of the
directives:
2011/65/EU (RoHS)
2006/42/EC
2014/30/EU
and the following harmonized standards have been used.
EN 62841-1:2015 + AC:2015
EN 55014-1:2017
EN 55014-2:2015
EN IEC 63000:2018
Winnenden, 2020-01-10
Alexander Krug / Managing Director
Authorized to compile the technical le
Techtronic Industries GmbH
Max-Eyth-Straße 10, 71364 Winnenden, Germany
English
14
SYMBOLS
CAUTION! WARNING! DANGER!
Please read the instructions carefully before starting the
machine.
Always wear goggles when using the machine.
Wear gloves!
Do not use on or near live circuits
Do not use while standing on a ladder
Remove the battery pack before starting any work on the
appliance.
Accessory - Not included in standard equipment, available
as an accessory.
Do not dispose electric tools, batteries/rechargeable
batteries together with household waste material.
Electric tools and batteries that have reached the end of
their life must be collected separately and returned to an
environmentally compatible recycling facility. Check with
your local authority or retailer for recycling advice and
collection point.
n
No-load speed
0
V
Voltage
Direct Current
European Conformity Mark
Ukraine Conformity Mark
EurAsian Conformity Mark