Fan Speeds; Timer Function - KRUG+PRIESTER IDEAL AP140 PRO Instrucciones De Uso

Control panel
On/off button
A
Filter replacement
F
indicator

Fan speeds

• Press the on/off button (A) to switch the air purifi er on or off.
• The air purifi er runs in automatic mode
adapts to the measured air quality. The worse the air quality, the higher the fan speed.
• Press the fan speed button (B) to exit automatic mode. The air purifi er now runs at
fan speed . Press again to increase the fan speed to
Press again to increase the fan speed to
• The turbo speed setting for fast purifi cation of the ambient air requires the air purifi er to run at
maximum capacity. This can only be selected manually.
Timer functions
Pressing the timer while the air purifi er is switched on activates the "switch-off timer"
set time, the air purifi er switches off:
• Switch the air purifi er on (on/off button A).
• Press the timer button (C) to activate the timer. Press repeatedly to increase the timer time:
(h)   
lights up) to disable the timer function.
• The timer indicator counts the respective time with (
displayed.
Pressing the timer button while the air purifi er is switched off activates the "switch-on timer"
after the set time, the air purifi er switches on.

All manuals and user guides at all-guides.com
Fan speed button
B
Fan speed indicator
G
Daylight sensor
J
. Each number lights up in turn. Press the timer button again (no number
Air quality indicator
E
Air quality sensor
L
IR receiver
K
. In automatic mode, the fan speed (G) automatically
.
, or to the turbofan speed
 Countdown). The remaining time is
D
Timer button
C
Timer indicator
H
Quiet indicator
I
.
Quiet button
after the

33