Dockin D WAVE Manual Del Usuario página 4

TURNING ON
Press the power switch on the back of the D WAVE and then press
the "On / Standby" button on top to turn the device on.
PAIRING / CONNECTING
Bluetooth:
The D WAVE will automatically connect with the last Bluetooth de-
vice (when in BT mode) or changes into pairing mode (BT LED is
blinking).
Connecting:
• Turn on the D WAVE speaker and select the BT mode via the
"Source" button.
• Activate Bluetooth on your device (Bluetooth settings).
• Go to your Bluetooth settings and scan for discoverable de-
vices.
• Select "DOCKIN D WAVE" from the Bluetooth device list.
• After successful pairing the BT LED on the D WAVE stays lit and
you can play music.
AUX / RCA / Optical:
• Connect the sound source via the appropriate cable to the
back of the D WAVE speaker.
• Turn on the D WAVE speaker and select the desired mode via
the "Source" button.
• Start the music on your playback device.
TURNING OFF
Press the "On / Standby" button to switch off the D WAVE spea-
ker. For transportation or during long periods of non-usage you can
completely turn it off by using the power switch on the back.
CHARGING
Charge your D WAVE by using the provided power cable. The char-
ging input is on the back of the device.
The charging status is displayed by the four white charging LEDs on
the top panel. They show the battery charge in 25% steps.
POWER SAVING FUNCTION
If there hasn't been any signal transmission or charging via the USB
output for 15 minutes, your D WAVE turns off automatically. If the
AUX cable is connected the power saving function is disabled, which
allows stationary use.
PACKAGE CONTENT
• D WAVE speaker
• Charging cable
• AUX cable
• Manual