Kenwood KAX644 ME Manual De Instrucciones página 3

This appliance conforms to EC
G
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
This KAX644ME attachment features
the Twist Connection System
and is designed to fit directly on the
latest generation Kenwood Chef
models (identified as KVC and KVL
series).
This attachment can also fit Kmix
kitchen machines featuring a slow
speed attachment outlet (KMX
series).
To check that this attachment is
compatible with your kitchen
machine you will need to ensure
both components feature the Twist
Connection System
If your kitchen machine features the
Bar Connection System
also need an adaptor before
operation is possible. The reference
code for the adaptor is KAT001ME.
For more information and how to
order the adaptor visit
www.kenwoodworld.com/twist.
Use the fruit press to extract juice
from soft fruits and berries.
before using for the first time
1 Wash the parts: see 'Cleaning'.
key
pusher
hopper
feed tube and body
scroll
filter
retainer
juice outlet
filter cover
filter sealing ring
pulp adjuster nozzle
.
you will
3
to assemble your fruit
press
1 Fit the scroll inside the body.
2 Fit the filter to the body – align the
locating tab
body.
3 Lock the filter cover in position by
holding by the retainer
anti-clockwise until the locating line
is directly underneath the line on the
body .
4 Fit the pulp adjuster nozzle.
preparing food
Remove stones (plums, peaches,
G
cherries etc).
Remove tough skins (melons,
G
pineapples, cucumbers, etc).
Soft-skinned and other foods just
G
need washing (apples, pears,
spinach, grapes, strawberries etc).
to use your fruit press
1 Lift off the slow speed outlet cover
by pressing the top and lifting off
2 With the attachment in the position
shown, locate to the slow speed
outlet and rotate to lock in place
3 Fit the hopper.
4 Place a suitable collecting vessel
under the juice outlet to collect the
juice and under the pulp adjustable
nozzle to collect the pulp.
5 Cut the food into small pieces to fit
the feed tube.
6 Switch on to speed 2 and lightly
push the food down evenly with the
pusher.
Clogging will occur if the feed tube is
G
overfilled or food packed too tightly.
Note: the pulp will take a while to
G
start coming out of the front of the
pulp adjuster nozzle – this is normal
operation.
During juicing the pulp
G
adjuster nozzle can be turned
to adjust the rate the pulp is
ejected - turn anti-clockwise
to increase and clockwise to
decrease the flow.
with the slot in the
and turn
.
.