Publicidad
Idiomas disponibles
Idiomas disponibles
Table
Label with
Kind of
ironing
textile
instructions
Synthetic
e.g. acetate,
acrylic,
B
viscose,
polyamide,
polyester.
Silk
C
Wool
Cotton
D
Linen
Please note: This article cannot be ironed!
Z
try out the ironing temperature. (Always start at
a low temperature and increase to one which
gives the required results.)
• Pure woollen fabrics (100% wool) may be
pressed with the iron set to a steam position. It
is recommended to apply shot-of-steam and
use a dry pressing cloth.
When steam-ironing woollen fabrics, shining of
the fabric may occur. This can be prevented by
turning the article inside out and ironing the
inside.
• Velvet and other textures which rapidly acquire
shiny spots should be ironed in one direction
only (with the nap), applying only light pressure.
Always keep the iron moving.
• Iron the reverse side of synthetic materials and
silk to prevent shining spots. When ironing
coloured silk, it is not advisable to use steam as
this may cause stains.
Temperature
Steam
dial
ironing
MIN
|
|
1
|
|
A
|
2
A
|
3
MAX
5
Filling with water
- Position the
steam tank
on a stable
flat surface
and unscrew
the cap of
the steam
tank (D) by
turning anti-
clockwise.
- Fill the steam tank with water
(max. 0.9 litre) (fig 2).
• You can use tapwater. However, if the
water is very hard (hardness higher
than 17 °DH / 21
advisable to use distilled water.
• Never use vinegar, descaling agents
or other chemicals.
- Close the
steam tank
by turning
the screw
cap
clockwise by
hand until
tight (fig. 3).
If you begin ironing
- Fill the steam tank before inserting the
mains plug into the wall socket.
While ironing
Caution: If heated-up,
the steam tank will be
under pressure.
Only refill if the steam
tank is empty (i.e. when
no more steam comes
from the soleplate during
steam-ironing).
- Switch the iron off by
setting switch (C) to
position O (fig. 4).
- Switch the steam tank
off by setting switch (B)
to position O (fig. 5).
(for steam-ironing)
2
1
⁄
°Clarke), it is
4
3
4
5
Publicidad
