5
6
tank. If necessary, repeat the operation until the appliance releases clean steam: it is possible
to check the cleanliness passing the steam head on a dry cloth.
the accessory on the appliance and dispense steam.
TROUBLESHOOTING
Warning!
Immediately switch off the appliance in case of operational faults and electrical failures.
No steam comes
out of the nozzles. the minimum.
-
crease of the noise
level of the pump.
Water leakage
from the nozzles.
24
Causes
Not plugged in.
The appliance is not ready
for use.
Water shortage in tank.
The steam outlet holes
may be clogged with
limescale.
Water shortage in tank.
residue in the steam duct.
Check that the appliance is properly plugged
in. Check that there is current on the power
supply line. Try to plug the appliance into
another socket-outlet.
Turn the steam dispensing knob to increase
the amount of steam.
Wait a few seconds to allow the steam prepa-
ration.
Clean the limestone.
Turn the steam dispensing knob until you see
to come out, turn off the appliance. Wait at
least 5 minutes until the steam head and the
cloth are well cooled. Try again.
-
-
-