Knob (With Bolt); Gg Shelf Pin - Twin Star KC4339-P239-40 Instrucción De Montaje

6. Locate Right Doors (C) and Left Doors (B). Slide
door hinge keyhole into panel hinge bracket.
(Diagram 1)
Use Phillips Head Screwdriver to tighten screws.
(Diagram 2)
TO ADJUST HINGES
To adjust door forward or backward change keyhole
slot position. (As Shown In Diagram 3a)
To adjust door right or left loosen/tighten screw.
(As Shown In Diagram 3b)
To adjust door up or down adjust bracket height.
(As Shown In Diagram 3c)
Attach the Knob (FF) to the Left Doors (B) and Right
Doors (C), use the bolts attached through the
pre-drilled holes in the doors. Then use a Phillips
Head Screwdriver to tighten the bolts.
Hardware Used
FF

Knob (with bolt)

7. Choose desired height of Interior wood shelf (H) and
place the four Shelf Pins (GG) into same height
shelf holes inside side panels. Insert Wood
Shelf (H), allow Wood Shelf (H) to rest on
the Shelf Pin (GG).
Hardware Used
GG Shelf Pin
8. screw the Cap (I) through the connect blocks (L) to
install the pushing bar (K).
Fig. 6
C
x 8
Fig. 7
x 4
Fig. 8
L
I
6
C
B
H
H
GG
L
K
FF
I