Fein WSG 8-115 Manual De Instrucciones página 21

3 41 01 050 06 0.book Seite 21 Dienstag, 12. Juni 2007 10:57 10
Use extra caution during "plunge cuts" in walls or
other blind areas.
Safety instructions, particularly for sanding
work with a sanding disc.
When sanding, do not use an excessively oversized
sanding disc. Follow the manufacturer's recommen-
dations when selecting sanding discs.
Special safety instructions for sanding work
with wire brushes.
Be aware that wire bristles are thrown by the
brush even during normal operation. Do not over-
stress the wire bristles by applying excessive load
to the brush.
If the use of a guard is stipulated for sanding with
wire brushes, do not allow the wire bristles to con-
tact the guard.
At a glance.
1 Locking button
2 Speed regulation button
3 Speed display
4 Pressing surface (4x)
5 Threaded flange
6 Auxiliary handle
7 Wheel guard with fast adjustment
8 Wheel guard with tightening screw (8b)
9 Standard accessories
Intended use of the power tool.
Operating instructions.
Mounting the auxiliary handle (Figure 6).
EN