Operations
04 Ice Maker / Filter Reset (3 sec)
Ice Maker
Filter Reset
52
English
Untitled-3 52
Press Ice Maker to turn the ice maker on or off.
The ice maker has 3 indicators (
) to indicate its operating status.
• When the ice maker operates, the corresponding indicator (
) turns on.
• When the Rapid Ice function operates, the corresponding
indicator (
&
• When the ice maker is turned off, the corresponding indicator
(
) turns on. In this case, ice making is disabled
even if you press the Cubed Ice or Crushed Ice buttons on the
dispenser panel. To enable ice making, you must turn the ice
maker on.
NOTE
• If the fridge part ice maker is turned off, it will turn on if you
press and hold the ice lever for more than 5 seconds.
• When
&
faster than when
• When
is on, amount of ice making increases to double.
Turn off Rapid Ice to save energy.
After about 6 months (and typically, about 300 gallons (1200 L) of
water), the Filter indicator blinks red for several seconds when you
open the door, reminding you that the filter needs to be replaced.
When this happens, replace the filter, and then press and hold Ice
Maker for 3 seconds. The filter lifecycle will be reset and the Filter
indicator turns off.
NOTE
• Some regions have relatively large amounts of lime in their
water. This can reduce the lifecycle of the filter. In these areas,
you will have to replace the water filter more often than
specified above.
• If water is not dispensing properly, the water filter is most likely
clogged. Replace the water filter.
/
/
) turns on.
indicators are on, ice making is
indicator is on alone.
4/14/2020 4:29:31 PM