Scott RC PREMIUM ITD LF GLOVE Manual Del Usuario página 9

Minimum requirements of resistance to impact abrasion (in seconds)
IMPACT ABRASION RESISTANCE
(PALM FACE / ALL LAYERS)
SINGLE ABRASION TIME
MEAN ABRASION TIME
Minimum requirements of impact attenuation
IMPACT ATTENUATION
RESISTANCE (KNUCKLE
PROTECTION / ALL LAYERS)
SINGLE RESULT
MEAN TRANSMITTED FORCE
• VII. HOW TO ADJUST YOUR PRODUCT
CHOOSING THE CORRECT SIZE
It must be chosen in reference to the size indicated in the size chart
on page 2 or on the garment itself. SCOTT Sports SA shall not accept
any complaints arising from the use of an incorrect fitted product.
Please bear in mind that a trial of the product before purchase is
the best way to find the correct size.
Bike Gloves : Bike gloves are designed for special application.
These gloves are meant to be used solely for biking and do not
conform with the sizing values set out by EN 4 20 : 2 003 + A1 : 2 009.
These gloves have been designed to offer the best possible com-
fort and dexterity during the biking activity.
POSITION AND FIT
For the product to work properly, it must cover the protected area
correctly. The garment must have the correct size, chosen from
the manufacturer's size chart.
The product is designed to stay firmly in contact with the hand.
Straps and elastic bands should be fastened tightly to guaran-
tee stability of the equipment during use. Check that all closure
Level 1
≥ 3,0 s
≥ 4,0 s
Level 1
optional
≤ 9,0 kN
≤ 7,0 kN
9 - ENGLISH
Level 2
≥ 6,0 s
≥ 8,0 s
Level 2
mandatory
≤ 5,0 kN
≤ 4,0 kN