Safety Precautions - Beijer Electronics E100 Manual Del Usuario

GB

Safety precautions

General
– Check the delivery for transport damage. If damage is found, advise your supplier.
– The product fulfils the requirements of article 4 of EMC directive 89/336/EEC.
– Do not use the product in an explosive environment.
– Modifications, changes and additions to the product are forbidden.
– Use only spare parts approved by the manufacture.
– Read the user instructions carefully before use.
– This equipment should only be operated by qualified personnel.
At installation
– The product is constructed for stationary installation.
– Install the product according to the accompanying installation instructions.
– The product must be grounded according to the accompanying installation instructions.
– This equipment must be installed by qualified personnel.
– High voltage, signal and supply cables must be separated.
– The product should not be mounted in direct sunlight.
In use
– Keep the equipment clean.
– Emergency stop and other safety functions should not be controlled from the terminal.
– Do not touch the keys, displays, etc. with sharp objects.
Service and maintenance
– The agreed warrenty applies.
– Clean the display and face with a soft cloth and mild detergent.
– Repairs should be made by qualified personnel.
At disassembly and scrapping
– Local regulations apply concerning recycling of products or part.
– Please note that the lithium battery, electrolyte condenser and display contain hazardous
substances.
7-2