Publicidad
Idiomas disponibles
Idiomas disponibles
Section 4: Operation
How
to Use
Accessory Tray
The unit is equipped with an accessory tray with places to
store your nozzle extension and slots to hold the cleaning
solution bottle and the detergent siphoning filter. There are
also two hooks at the ends of the handle to hold your
spray gun and high pressure hose.
NOTE: The extra holes in the tray are for storing a brush
and a turbo wand. The brush and turbo wand are NOT
includedwith your pressure washer. You can buy these
items as optional accessories.
I.
Placenozzle extension through hole on accessory tray,
as shown in Figure 14.
2.
Hang your chemical solution bottle on "J"hook and
place detergent siphoning filter in last slot on left
(Figure 14).
3.
Placespray gun on hook attached to accessory tray on
right side of unit (Figure 14).
4.
Hang high pressure hose on hook attached to
accessory tray on left side of unit.
How to Use Spray Tips
The quick-connect on the nozzleextension allows you to
switch between four different quick connect spray tips. The
spray tips varythe spray pattern as shown (Figure 15).
CAUTION
Low Pressure
Black
Use to apply
chemical
High Pressure
40 ° White
15 ° Yellow
0 ° Red
Follow these instructions to change spray tips:
I.
Engagesafety latch on spray gun.
2.
Pullback collar on quick-connect and pull current
spray tip off. Store spray tips n slots on holder that's
attached to nozzle extension.
3.
Select desired spray tip:
For gentle rinse, select white 40° spray tip.
To scour surface, select yellow 15° or red 0 ° spray
tip.
To apply chemical, select black spray tip.
4.
Pull back on collar, insert new spray tip and release
collar. Tug on spray tip to make sure it is securely in
place.
5.
For most effective cleaning, keep spray tip from 8 to
24 inchesaway from cleaning surface. If you get spray
tip too close, you may damagecleaning surface. DO
NOT get closer than 6 incheswhen cleaning tires.
NEVER exchange spraytips without locking the safety latch
on the trigger.
m
Publicidad
