Glacier bay HD883X-0004 Guía De Uso Y Mantenimiento página 6

Installation (continued)
6
Removing the mounting kits
□
Remove the index (N). Loosen the screw (O)
and remove the diverter handle (P).
□
Loosen the ange (Q) from the diverter valve
body (R). Adjust the rubber washer (S), metal
washer (T) and mounting nut (U) to the bottom
of diverter valve body (R).
7
N
O
P
Q
R
S
T
U
6
Installing the diverter valve
body
NOTE: Make sure that the face marked with "FRONT" on
the diverter valve body (R) is facing forward.
□
From underneath the deck, insert the diverter
valve body (R) with the rubber washer (S),
metal washer (T) and mounting nut (U) through
the hole.
□
From above, thread the ange (Q) onto the
diverter valve body (R).
□
Tighten the mounting nut (U) using a basin
wrench, so that the ange (Q) sits ush against
the nished deck surface.
Q
R
S
T
U