Maintenance And Cleaning; Noise/Vibration Information; Declaration Of Conformity - Bosch GBH 2-24 DS Manual Del Usuario

Maintenance and Cleaning

Before any work on the machine itself, pull the mains plug.
For safe and proper working, always keep the machine and the ventilation slots
clean.
Exchanging dust cap
Damaged dust protection caps should be replaced as soon as possible since
dust that enters the tool holder can cause malfunctions.
Pull back and hold the locking sleeve 2. Pull off the dust cap 1 with a suitable
tool.
With the locking sleeve pulled back, pull on the new dust cap until it sits firmly
over the tool holder and the locking sleeve can again be slid forward.
WARNING
Important instructions for connecting a new 3-pin plug to the 2 wire
cable.
The wires in the cable are coloured according to the following code:
Do not connect the
blue or brown wire to
the earth terminal of the
plug.
live = brown
Important: If for any
reason the plug is cut
off of the cable of this
machine, it must be
disposed of safely and
not left unattended.
If the machine should happen to fail despite the care taken in manufacture and
testing, repair should be carried out by an authorised customer services agent
for Bosch power tools.
For all correspondence and spare parts orders, always include the 10 digit order
number of the machine!

Noise/vibration information

Measured values determined according to EN 50 144.
Typically the A-weighted noise levels of the tool are:
Sound pressure level: 86 dB(A). Sound power level: 99 dB(A).
Wear ear protection!
The typical weighted acceleration is 10 m/s
strain relief
professionals only
neutral = blue
2
.
Specification subject to alteration without notice
Guarantee
We guarantee Bosch appliances in accordance with statutory/country-specific
regulations (proof of purchase by invoice or delivery note).
Damage attributable to normal wear and tear, overload or improper handling will
be excluded from the guarantee.
In case of complaint please send the machine, undismantled, to your dealer or
the Bosch Service Centre for electric power tools.
Service
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham-Uxbridge
GB-Middlesex UB 9 5HJ
✆
Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (08 95) 83 86 81
✆
Advice line. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (08 95) 83 84 02
FAX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (08 96) 83 87 89
To be fitted
Ireland
by qualified
Beaver Distribution Ltd.
Greenhills Road
✆
Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (01) 4 51 52 11
FAX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (01) 4 51 71 27

Declaration of conformity

We declare under our sole responsibility that this product is in conformity with
the following standards or standardization documents: EN 50 144, EN 55 014,
EN 61000-3, HD 400 according to the provisions of the regulations 73/23/EEC,
89/336/EEC, 89/392/EEC.
94
Dr. Alfred Odendahl
Robert Bosch GmbH, Geschäftsbereich Elektrowerkzeuge
Dr. Eckerhard Strötgen
16