Publicidad
Idiomas disponibles
Idiomas disponibles
Option A
Step 1:
Insert the power adapter into the 12V DC port
on the GXV3501. Plug the other end of the
adapter into an AC power outlet.
Step 2:
Plug an RJ45 Ethernet cable into the network
port. Plug the other end into a hub, switch or
router.
Step 3:
Connect the video-out BNC cable of an
analog camera to the video port on the
GXV3501.
Option B
Step 1:
Plug an RJ45 Ethernet cable into the network
port. Plug the other end into a Power over
Ethernet (PoE) switch.
Step 2:
Connect the video-out BNC cable of your
camera to the video input port of the
GXV3501.
If the GXV3501 is properly connected, the POWER,
READY and NETWORK indicator lights will flash green.
~3~
Gxv
3501 CONFIGURATION
Configuring the GXV3501 using Microsoft
Internet Explorer
Connect the GXV3501 to the DHCP server
S
tep 1:
Navigate your browser to:
http://www.grandstream.com/support/gxv_
series_surveillance/general/resources/gs_search.zip
S
tep 2:
Run the Grandstream GS_Search tool, that
you just downloaded.
S
tep 3:
Click on
device detection
S
tep 4:
The detected devices will appear in the
Output field
~4~
button in order to begin
Publicidad
