AGPtek RP33 Manual Del Usuario página 5

2. Power Off:
1) Slide the power switch downwards to turn it off.
2) Press the PLAY button for 3 seconds when the switch is at the
opposite side of "On" position.
Note: If you cannot switch on the recorder, please make sure the
slider switch is on the right side.
Recordings
Whenever interfaces, slide REC button upwardly to start
recording after it is powered on.
 Press PLAY button to stop or resume recording.
 Slide the REC button downwards to save the
recording and go to the audio playing interface
automatically, press PLAY button to play.
 Press / to go to the previous/next audio file.
While there is "REC" icon on main screen, press the PLAY button to
access to its function. Then a related list will show as, Recordings
library, Recording quality, AVR set, Monitor.
Recordings library, all of the recordings saved will be listed here.
Recording quality, choose the record format and bit rate.
AVR set, turn on/off the AVR mode.
Note: When choose to turn on AVR mode, and press REC button to
start recording, the recorder will start recording automatically if
sound is detected and stop recording when no sound detected.
Monitor, choose to turn on/off monitor.
3