AGPtek B3 Manual Del Usuario página 8

2. B3 connect with two Bluetooth-enabled devices
simultaneously while working as a Bluetooth transmitter
1) Named the two Bluetooth headsets or two Bluetooth
speakers as A and B.
2) Pairing with A, power on A and enter Bluetooth pairing
mode
3) Hold MFB for three seconds until the blue LED light
blinks quickly for entering into pairing mode, if B3 don't
automatically enters pairing mode, you can press MFB for
about 2s and then double click MFB after enter pairing
mode.
4) Put B3 and A together, waiting for about 30s, you will see
B3 blue LED light stays on after it paired with A successfully,
connect B3 to sound source and you can here voice from A,
power off A and B3 after connected successfully.
5) Power on B and pairing with B3, power off B3 after
paired successfully.
6) Hold MFB for about 3s until Blue LED flashes quickly to
enter into pairing mode, if B3 does not enter into pairing
mode, press MFB for about 2s then double click MFB to
enter into pairing mode.
7) Put B3 and B together, waiting for about 30s, you will see
B3 blue LED light stays on after it paired with B successfully,
connect B3 to sound source and you can here voice from B,
power off B3.
8) Power on A and waiting for about 10-20 seconds. Then
6