Publicidad
Idiomas disponibles
Idiomas disponibles
12
Quick Start Guide
External USB
If you are using an external HDD 2.5'', please use
the USB cable provided with your HDD for best
performance.
Zappiti back panel
Using Internal Drive
To insert the internal 3.5'' SATA HDD, please open the rack door, then insert the drive into the internal
enclosure until 3/4, then complete the installation by closing the door. This operation will complete the
installation of the disk into the rack. The Zappiti media player is compatible with drives formatted in
NTFS, ExFAT, FAT16, FAT32, HFS, EXT2/3. It is not possible to format hard drives via the Zappiti. You
must use a computer for this purpose. In case of NTFS GPT, please use 64 Ko allocation tables.
***Note: Please make sure that your hard drive is correctly formatted before you insert it in the tray.
More info: zappiti.uservoice.com/knowledgebase
Pre-formated HDDs are
available on sale here:
store.zappiti.com
Using SD / MMC Memory Cards
To use a memory card, insert it in the memory card slot located on the left side of the media player. It will be
detected as USB device (USB icon on the home page). Some SD memory cards may not be recognized by
the player or may work incorrectly ; in such case, please use a different model of memory card.
Connecting USB Drives
You can connect your USB drives to one of the
available USB ports. If you want to play video
files, USB 2.0 is enough to support very high
bitrate (up to 480 Mbps). If you want to transfer
files, we advise you to use USB 3.0 or USB
Type-C (not available on Zappiti Mini 4K HDR
model).
***Note: A dedicated USB icon located on the
home page can help you to detect if the drive is
connected correctly.
Power provided by USB ports may not be
enough to allow the USB drive to function correc-
tly; depending on the drive. Please do not
External HDD
disconnect or switch off the USB drive during
write (copy / transfer) operations.
The Zappiti players are compatible with UASP
HDD docking stations as well as USB hubs.
Zappiti Side View (right)
Open the tray and insert the HDD,
keeping the connectors on the front
Publicidad
