Technical Data; Noise And Vibration Data; Vibration Information - Ratio LR260NM Manual De Instrucciones

TECHNICAL DATA

Type LR260NM (PFS-designation of machinery, representative of Finishing Sander)
Rated voltage
Rated power
No load speed
Protection class
Base size
Orbital dia.
Machine weight

NOISE AND VIBRATION DATA

A weighted sound pressure LpA 74,3 dB(A)
KpA: 3.0 dB(A)
A weighted sound power LwA 85,3dB(A
KwA: 3.0 dB(A)
Wear ear protection.

VIBRATION INFORMATION

Vibration total values (triax vector sum) determined according to EN 60745:
Vibration emission value:
ah = 4,6 m/s2 Uncertainty K = 1,5 m/s²
The declared vibration total value may be used for comparing one tool with another, and may also be
used in a preliminary assessment of exposure.
WARNING:The vibration emission value during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used dependant on
the following examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed
ADVERTENCIA:To be accurate, an estimation of exposure level in the actual conditions
of use should also take account of all parts of the operating cycle such as the times
when the tool is switched off and when it is running idle but not actually doing the job. This
may significantly reduce the exposure level over the total working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades
Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate)
If the tool is to be used regularly then invest in anti vibration accessories.
Avoid using tools in temperatures of 100C or less
Plan your work schedule to spread any high vibration tool use across a number of days.
24
230 - 240 V ~ 50 Hz
260 W
6000 - 12000 /min
/II
90 x 187 mm
1,6 mm
1.8kg