Publicidad
Note: Should your computer not start, please update the BIOS firmware. For
more information please contact your mainboard manufacturer.
Driver Installation
Windows XP, 2003
1.
After installation of the device, and after start of Windows the Hardware
wizard appears.
2.
Put the driver CD in the CD ROM drive and click on "next".
3.
Choose the option "No, not this time" and click "next".
4.
Choose "Install software automatically" and click "next".
5.
When driver is located, click "Continue installation or Yes".
6.
Click on "next". Click on "finish".
7.
Click on "next", click "Continue installation or Yes" and on " finish".
8.
Restart your PC.
9.
After restart you can start using the device immediately.
Windows 2000
1.
After installation of the device, and after start of Windows the Hardware
wizard appears.
2.
Put the driver CD in the CD ROM drive and click on "next".
3.
Please choose "Search for a suitable device driver" and click on "Next".
4.
Select the "CD-ROM" option and click on "next".
5.
After the driver is located, click on "next". Click on "finish".
6.
Restart your PC.
7.
After restart you can start using the device immediately.
Support Delock
If you have further questions, please contact our customer support
support@delock.de / www.delock.com or phone
0700 - DELOCKGE (0700 - 335 625 43).
You can contact our service hotline during the following times:
Mon – Fri: 9:00 – 17:30 pm charge 0,12 € / min*
-2-
Publicidad
