Philips OneBlade QP2520/70 Manual De Instrucciones página 7

Switching the appliance on and off
1 To switch on the appliance, press the on/off button once.
2 To switch off the appliance press the on/off button once.
Shaving
Before you use the appliance, always check the blade for damage or wear.
If the blade is damaged or worn, do not use the appliance, as injury
may occur. Replace a damaged blade before you use the appliance
(see chapter 'Replacement').
Shaving tips and tricks
- Make sure that the blade is in full contact with the skin by placing it flat
on the skin.
- For the best result, move the appliance against the grain.
- Make long strokes while you press lightly.
- You can use the appliance dry or wet with gel or foam, even in
the shower.
- Shaving a clean beard and face gives the best results.
1 Switch on the appliance.
2 Place the blade on the skin and move the appliance up or against
the grain in long strokes while you press it lightly.
Note: Make sure you hold the surface of the blade flat against your skin.
3 Switch off and clean the appliance (see 'Cleaning and maintenance')
after every use.
ENGLISH
7