Tripp-Lite P960-001-MSATA El Manual Del Propietario página 4

Installation
1. Remove the cover from the
2. Insert the included nuts into the
3. Connect your drive by inserting it into the
4. Using the included screws, secure the drive
5. When the drive is fully installed, place the
6. Connect the unit to the SATA port on your
7. Your drive is now ready for use.
16-08-036-933618.indb 4
P960-001-MSATA unit to expose the SSD
drive tray and mSATA connector.
corresponding slots on the board.
mSATA connector. Keep the drive at a low
angle to minimize stress on the connector.
by screwing it into the nuts.
cover back on to protect the drive from
dust and other contaminants.
computer.
4
8/19/2016 4:51:39 PM