Media Player Interface - dB Technologies B-HYPE m Manual De Uso

English

MEDIA PLAYER INTERFACE

This section contains the controls and inputs to
play .mp3, .wav, .wma files from:
• SD cards
• USB memory device
• device correctly paired
To play a file from the SD card / USB device:
1. Turn B-HYPE MOBILE on after connecting the
power supply cable (switch in ON position). For
further information, see paragraph "POWER
SUPPLY UNIT SECTION".
2. Insert the correct device in the relevant input
(see figure on the side). Note: it is possible to
use only one device at a time.
3. Press the switch-on button
for a few seconds. Once the display is on, push
the button shortly to select the source type.
4. Press the buttons
respectively to: play/pause the track, search
through the folders, automatically repeat the
track/access the equalization, rewind, fast
forward.
5. Adjust the 2 volumes of the mixer area (see
section "SECTION FOR CONNECTIONS AND
CONTROL"):
• MASTER volume
• Volume
To play the file from a
1. Turn B-HYPE MOBILE on after connecting the
power supply cable (switch in ON position). For
further information, see paragraph "POWER
SUPPLY UNIT SECTION".
2. Press the switch-on button
for a few seconds. Once the display is on, push
the button shortly to select the source type.
3. Enable the
device containing the audio track, checking
that its visibility is enabled.
4. Once communication is established the name
of the device is shown on display.
5. Adjust the 2 volumes of the mixer area (see
section "SECTION FOR CONNECTIONS AND
CONTROL"):
• MASTER volume
• Volume
B-HYPE MOBILE
of the player
device:
of the player
function on the player/
Code 420120272 REV. 1.1
27