Important - Braun CareStyle Compact IS 2044 Manual De Instrucciones

• This appliance is designed for house-
hold use only and for processing nor-
mal household quantities.
• Please clean all parts before first use
or as required, following the instruc-
tions in the Care and Cleaning section.
• The cords should never come in con-
tact with hot objects, the soleplate,
water and sharp edges.
• Before plugging into a socket, check
whether your voltage corresponds
with the voltage printed on the bot-
tom of the appliance and that you are
using an earthed socket.
• When using an extension cord watch
out that it is in good condition, has a
plug with an earth connection and
corresponds with the power rating of
the appliance (16A).
• The soleplate and the iron rest can
reach very high temperatures that
could lead to burns. Do not touch
them.
• Choking hazard. The appliance might
contain small parts. Some of those
small parts might be required to get
disassembled during cleaning and
maintenance operations. Handle with
care and keep small parts out of
reach of children.

• Important:

Keep all packaging (plastic bags,
polystyrene foam) away from children.
• Caution: Due to the high power of this
steam iron please make sure that
your mains supply is sufficient.
Please contact your local electric
power company to make sure that the
so called mains impedance is not
higher than 0.372 Ohm.
12
5712812131_CareStyle_1_INT_S6-130.indd 12 5712812131_CareStyle_1_INT_S6-130.indd 12
Description
Iron
1 Temperature control LED
2 Steam button
3 Heel rest
Base unit
4 Iron rest
5 Double cord / double cord storage
6 Water tank lid
7 Anti-limescale fi lter cartridges
8 Water tank
9 Power cord / power cord storage
10 Eco mode indicator
11 iCare mode indicator
12 Mode button
13 Anti-limescale indicator
14 Reset button
15 Locking knob
Intended use
The appliance must be used only for ironing
garments which are suitable for ironing according
to the care label. Never iron or dampen garments
while wearing them.
Unpacking
Take the unit out of the carton. Remove all pieces of
the packing. Remove any possibly extant labels on
the unit (do not remove the rating plate).
Insert anti-limescale fi lter cartridge
• Remove the anti-limescale fi lter cartridge (7)
from the polybag and follow the instructions
given on the pack.
• Open the water tank lid (6).
• Insert the anti-limescale fi lter cartridge into
position until it locks into place.
• Close the water tank lid.
Note: If no anti-limescale fi lter cartridge is installed,
or the anti-limescale fi lter cartridge is not installed
correctly, the appliance will not work correctly.
(A) Filling the water tank
• Make sure that the iron is unplugged.
• Open the tank lid (6) and fi ll the water tank with
tap water, taking care not to exceed the «max»
level. If you have extremely hard water, we
recommend that you use a mixture of 50 % tap
water and 50 % demineralised water. Do not add
any additives (e.g. perfumes and other chemical
materials). Do not use condensation water from a
tumble dryer.
• Place the appliance on a stable, level surface.
28.08.18 14:09 28.08.18 14:09