• Place the attachment (E) and lock it in the anti-clockwise direction such that the outlet is in alignment
with the appliance.
• Place the multi-function head (A3) in the horizontal position by pressing the button (A2) once again.
• Make sure that the safety cover (A5) is locked correctly (clockwise) on the high-speed outlet (A4).
• Facing the attachment (E) outlet, insert the drum body (G1) inclined to the right, aligning the two
bayonets in the drum body with the two notches in the attachment. Push the drum body home and turn
the drum body anti-clockwise until it latches with the feed tube in the vertical position.
• Insert the chosen drum into the body, and make sure that it is fully engaged in the body.
4.2 - USAGE AND TIPS
• Place a container to collect the preparation in front of the appliance.
• Run the appliance by turning the selector (A1) to speed "3" to slice and to speed "4" to grate.
• Place the food in the feed tube on the body and press down with the pusher (G2). Never push the
ingredients with your fingers or any other utensil.
- You can prepare up to 2 kg of food.
- Maximum time of use: 10 minutes.
• To stop the appliance, turn the selector to "0" speed and wait for the appliance to come to a complete
stop.
• Unlock the drum body in the reverse order of the assembly.
• Use the drums to:
- Grate coarsely (G4) / grate finely (G5) : carrots, celery, potatoes, cheese, etc.
- Slice thickly (G3) : potatoes, carrots, cucumbers, apples, beetroot, etc.
- Potato shredder (G6): potatoes, parmesan, etc.
5 - EXTRACTING JUICE FROM FRUITS AND VEGETABLES
(DEPENDING ON MODEL)
ACCESSORIES USED:
- Assembled juice extractor (H).
5.1 - ASSEMBLING THE JUICE EXTRACTOR
• Place the filter (H3) in the middle of the juice collector (H4).
• Lock the lid: turn it anti-clockwise and lock the lid (H2) on the juice collector (H4) (closed padlock
position).
• General locking: push the locking lever (H6) to closed padlock position.
5.2 - FITTING THE JUICE EXTRACTOR ON THE APPLIANCE
• Place the multi-function head (A3) in the horizontal position: press the button (A2) and manually lower
the multi-function head (A3) until it locks (the button (A2) returns to its initial position).
• Unlock and remove the cover (A5) from the outlet (A4) by turning it anti-clockwise.
• Make sure that the appliance is switched off before locking the juice extractor (H).
• Lock the assembled juice extractor on the outlet (A4) by turning it clockwise, so as to have the outlet
for the pouring spout aligned with the appliance.
• Fit the pouring spout (H5) on the collector (H4).
• Check that the pouring spout (H5) is fully open.
5.3 - USAGE AND TIPS
• Place a large glass under the pouring spout (H5).
• Run the appliance by turning the selector (A1) to speed "3".
• Cut the fruits and/or vegetables into pieces.
• Insert them down the feed tube in the lid (H2) push them slowly using the pusher (H1). Never push the
ingredients with your fingers or any other utensil.
17
EN