Cleaning; Parts Included With Hood; Parts Not Included With Hood; Tools Needed - Kenmore 233.5580 Serie Manual De Uso Y Cuidado E Instalación

CLEANING

WARNING: To reduce the risk of electric
shock, disconnect from power supply before
cleaning.
ALUMINUM MESH FILTERS
Clean frequently using hot water and a mild detergent
or in your dishwasher. The aluminum mesh filters should
be washed approximately every month depending on
the amount of usage. Wash more often if your cooking
style generates greater grease - like frying foods or wok
cooking.
PAINTED HOOD SURFACES
Wiping regularly with mild soap/detergent and warm
water should protect painted hood surfaces. Be cau-
tious about using "New and Improved" cleaning agents.
Your hood is installed over hot cooking equipment. Most
chemicals found in cleaning agents react with heat to
loosen paint.
STAINLESS STEEL HOOD SURFACES
Stainless steel hoods should be washed regularly with a
clean cloth, warm water and mild soap or dish detergent.
Clean in the direction of the polish lines. Rinse well with
clear water and wipe dry immediately. You may wish to
apply light oil used for furniture polishing to emphasize
it's bright finish.
FAN ASSEMBLY
Fan blade can be cleaned with a damp cloth and mild
detergent. Use care when cleaning fan blade - it must not
become bent or misaligned. DO NOT ALLOW WATER
TO ENTER MOTOR. Make sure all surfaces are com-
pletely dry before re-installing filters and restoring power.
Motor is permanently lubricated. Do not oil or disas-
semble motor.
TOOLS NEEDED FOR HOOD INSTALLATION
Screwdriver
1/4"
(Flat & Phillips)
Nutdriver
Pencil
Duct Tape
Wire
Sabre
Stripper
Saw
Tape
Measure

PARTS INCLUDED WITH HOOD

7-inch Round
Duct Adapter
3¼" x 10"
Damper/Duct Connector
Parts Bag
(4 hood mounting screws inside)
Fluorescent Light Bulb
(1 per hood)
Night Light Bulb
(1 per hood)

PARTS NOT INCLUDED WITH HOOD*

OPTIONAL PARTS
7-inch Round Damper
(For use with 7-inch Round Duct)
Sears Part No. 59183
Keyhole
-or-
Saw
4 Drill
Aluminum Grease Filter
(2 per hood)
(purchase separately)
Splashplate
Sears Part Nos.
58120 30" Black/Biscuit
58128 30" White/Almond
Cord Kit
(Allows hood to be
plugged into a standard
120 VAC wall outlet)
Sears Part No. 50300
Ducting Accessories
(See "Equivalent Duct
Length Chart" on page
5 for Ducting Accessory
Model Nos.
"Parts Not Included
With Hood" available
by calling Sears at
1-800-4-MY-HOME ®