Epson L121 Guia De Instalacion página 3

L121
Start Here
1
Unpack
Note: The ink bottles and printer cables may be packed inside the product. The included ink bottles
must be used for product setup and are not for resale.
2
Fill ink tanks
Warning: Keep ink bottles out of the reach of children and do not drink the ink.
Caution: This product requires careful handling of ink. If ink spills, wipe it off immediately with
a damp towel to avoid permanent stains. If ink gets on your clothes or belongings, it may not
come off.
Press the
the power and
3
Load paper
Caution: Replace bottle cap tightly, or ink may leak.
power button and wait until
cancel lights stay on.
IMPORTANT: Before using this product, make sure you read these
instructions and the safety instructions in the online User's Guide.
Note:
• Epson cannot guarantee the quality or reliability of third-party ink.
• Use the ink bottles included with the printer to set up the product. Part of the
ink will be used to charge the print head. These bottles will print fewer pages
compared with replacement ink bottles.
• The included ink bottles are designed for reliable printer setup and cannot be
resold.
Fill each tank with the correct ink color.
Press and hold the
until the
takes approximately 20 minutes. Ink charging is
complete when the
cancel button for 3 seconds
power light starts flashing. Ink charging
power light stops flashing.