I.SOUND Universal Guía Del Usario página 3

Removing the device cradle
1. Unscrew the screw cap by turning it counter-clockwise.
2. Pull the cradle o the Car Suction Mount.
A aching the Car Suction Mount to your vehicle
NOTE: The suction cup only works on a clean, smooth
glass window.
1. Make sure the lever is in the unlocked position. The lever will
be facing down near the ball joint.
2. Press the suction cup rmly onto the window.
3. While holding and pressing the suction cup rmly against
the window, press the lever up into the lock position.
4. Give the Car Suction Mount a li le tug to make sure it is
securely a ached.
NOTE: Do not put any device in the Car Suction Mount until it
is secure on the glass. Make sure there is no dirt, dust or debris
on the suction cup.
Removing the Car Suction Mount om
your vehicle
1. Remove your device om the device cradle.
2. Hold the Car Suction Mount with one hand and release the
lever on the Car Suction Mount with the other hand; the
mount will release om the glass.
How to use the device cradle
1. Push the center release bu on on the cradle and push up to
extend the cradle to its most extended position.
2. Place your device into the cradle and push down the top of
the cradle until it clicks into a locked and secured position.