Parts And Components; Product Assembly; Before Use - cecotec HYDROSTEAM 1040 ACTIVE&SOAP Manual De Instrucciones

ENGLISH

1. PARTS AND COMPONENTS

Fig. 1
1. Steam outlet
2. Accessory securing button
3. Safety valve
4. Child-safety lock
5. Steam-releasing trigger
6. Handle
7. Steam boiler
8. Indicator lights
Accessories list
Fig. 2
1. Measuring cup
2. Nylon brush
3. Metallic brush
4. Small nozzle
5. Bent nozzle
6. Ironing brush
7. Mop for ironing brush
8. Mop for floor brush
9. Extension tube
10. Soap bottle
11. Floor brush
12. Floor brush mop
13. Floor nozzle
14. Storage bag
15. Steam hose

2. BEFORE USE

Take the product out of the box.
Remove all packaging materials. Keep the original box.
Make sure all the components are included and in good conditions, otherwise, contact
immediately the official Technical Support Service of Cecotec.
The device uses hot and high-pressure steam for cleaning floors, windows and clothes.
This method kills the bacteria and removes the dust. Moreover, it does not use any chemical
product, therefore it does not pollute.
It has an automatic heating control system to continue producing steam for cleaning.
HYDROSTEAM 1040 ACTIVE&SOAP
30

3. PRODUCT ASSEMBLY

Water refilling
Disconnect the plug from the wall-socket.
Press the steam-releasing trigger to release the steam until none comes out.
Let the device cool down for at least three minutes and then remove the safety valve turning
it counterclockwise.
Fill the measuring cup with 350 ml of purified water.
Assemble the safety valve and fix it tightly turning it clockwise.
Plug it in and pre-heat it for 4 minutes until the green indicator light is off.
Bent nozzle and steam hose assembly
Install the bent nozzle directly into the main body. Fig. 3
If needed, insert the steam hose firstly. Fig. 4
To disassemble it, press the accessory securing button and remove it. Fig. 5
Small nozzle connection
Install the small nozzle to the bent nozzle turning it anticlockwise. Fig. 6
To disassemble it, turn it clockwise. Fig. 7
Follow the same procedure for the nylon and the metallic brush.
How to use the soap bottle
Disassemble the soap bottle and fill it with detergent. Assemble it back to the main body
(fig. 8) and adjust the steam flow by turning it. To increase the amount of detergent, turn it
anticlockwise. Fig. 9
We recommend using specific cleaning agents for steamers.
Floor brush assembly
Fix the extension tube to the main body, then assemble the floor brush (fig. 10). Fix the floor
brush to the extension tube. Attach the floor cleaning brush.
4. OPERATION
Functions
Sterilization and anti-bacteria function
Assemble the bent nozzle and press the steam-releasing trigger for spraying the steam to the
desired area.
Clothes cleaning function
Install the ironing brush and the ironing mop. Press the steam-releasing trigger and spray
steam to the desired area.
ENGLISH
HYDROSTEAM 1040 ACTIVE&SOAP
31