Style selections SSDPS3272CLSV Manual De Instrucciones página 5

ASSEMBLY INSTRUCTIONS
Note: Instructions show right-side installation. Reverse for left-side installation.
1. Measure bottom finished opening. Using
handsaw (not included), cut threshold (D) to 1/16
in. less than finished opening measurement.
2. Run a bead of silicone caulk (not included) along
bottom lip of threshold (D) and place on shower
base threshold with the caulk bead facing the
outside of shower opening. Press firmly against
the entire length of threshold (D). Allow time for
caulk to fully dry per manufactures' instructions.
Note: Sloped side of threshold (D) must face the
inside of shower.
3. With a Phillips screwdriver (not provided), fully
tighten pivot bracket arm (AA) to bottom of pivot
jamb (A) using 1-1/4 in. screws (CC). Repeat on
top of pivot jamb (A). Only tighten screws 1/4 for
glass panel installation during step 7.
Hardware Used
AA
Pivot Bracket Arm
CC
1-1/4 in. Screw
1
2
3
x 2
x 4
5
D
D
D
Side
View
A
CC
AA