CMT ORANGE TOOLS CMT10 Manual De Instrucciones página 5

MAINTENANCE
CAUTION:
Always be sure that the tool is switched off and unplugged be-
fore carrying out any work on the tool.
Replacing carbon brushes
Remove and check the carbon brushes regularly. Replace when
they wear down to the limit mark. Keep the carbon brushes
clean and free to slip in the holders. Both carbon brushes
should be replaced at the same time. Use only identical carbon
brushes. (Fig. 20)
Use a screwdriver to remove the brush holder caps. Take out the
worn carbon brushes, insert the new ones and secure the brush
holder caps. (Fig. 21)
To maintain product SAFETY and RELIABILITY, repairs, any other
maintenance or adjustment should be performed by CMT Au-
thorized or Factory Service Centres, always using CMT replace-
ment parts.
After-sales Service and Customer Assistance
Our after-sales service responds to your questions concerning
maintenance and repair of your product as well as spare parts.
Our customer service representatives can answer your ques-
tions concerning possible applications and adjustment of prod-
ucts and accessories.
CMT Utensili S.p.A.
Via della Meccanica
61122 Pesaro - Fraz. Chiusa di Ginestreto
Italia
Disposal
The machine, accessories and packaging should be sorted for
environmental-friendly recycling.
Do not dispose of power tools into household waste!
Only for EC countries:
According the European Guideline 2002/96/
EC for Waste Electrical and Electronic Equip-
ment and its implementation into national
right, power tools that are no longer usable
must be collected separately and disposed of
in an environmentally correct manner.
www.cmtutensili.com
EC
Declaration of Conformity
The undersigned:
CMT Utensili S.p.A.
Whit address at:
Via della Meccanica
61122 Pesaro - Fraz. Chiusa di Ginestreto
Italia
Tel. #39 0721 48571
CERTIFIES
That the machine:
Type:
TRIMMER ROUTER
Model:
CMT10
We declare under our sole responsibility that
the product described under "Technical Data" is
in conformity with the following standards or
standardization documents: EN 60745 according
to the provisions of the directives
2004/108/EC, 2006/42/EC.
Signed: Marcello Tommassini
Chairman
EN
5